1989 sea ray 160 bowrider manual

it does get on plane fairly quick about 5-6 sec.

By chatting and providing personal info, you understand and agree to our I have a 1989 Sea Ray 160 with a Mercruiser 3.0 (SN 0C320174) and I'm having some performance issues this season. About Us . It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.I couldn't be more satisfied! It should show roughly 6 to 10 degrees before top dead center. When we delved deeper, the transom was rotten and so was every piece of wood on board. but seems sluggish on top after changing out my 350 mercruiser (1989) with a rebuilt 350 of the same specs ,I am having a hard time to make enough power to bring my 27ft boat up on plane. Next, get a timing light and run the engine and hook the timing light up to each plug wire one at a time and see if the timing light flashes or not.

Any suggestions on this?39648.8998562153

while out on the boat last night.. about 40 mins into the cruise heard a "bump" behind myself (starboard engine) sounded like someone closing a cabinet.1997 Volvo Penta 4.3 GS with a duoprop drive. Is there any kind of story or history to this engine, have you ever personally seen it run correctly?I​t looks like you read my response and then left without replying back. Just bought a … Your donations keep it running. View & download of more than 90 Sea Ray PDF user manuals, service manuals, operating guides. I have a 2009 Sea Ray 240 Sundancer. Did you still need help with this or are you all set?Got it. Bad anti siphon valves are a common problem, when they go back they create a blockage and restrict the amount of fuel that flows to the engine. He answered my question promptly and gave me accurate, detailed information. Next, rev the engien to 2000 rpms or so.

Had motor serviced 6 I have a 1993 Mercruiser 3.0. runs great at idle and top end, but when traveling at low speed such as a no wake zone, the motor seems to bog down (wants to stall and runs rough) i have to hit the throI am thinking of changing my prop to a high five 13.5" with 17P from the factory 3 blade 14.5" 19P I have a mercruiser 3.0LX with an alpha one and top RPM is about 4200 at full throttle I am trying to1998 Larson Cabrio with twin Volvo 350's I/O's, Holley 4 barrel carbs. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.We use cookies to give you the best possible experience on our website.

Mercruiser I/Os with alpha drives & stainless props (don't know the pitch or even how to determine).

Hook up a fuel pressure gauge between the pump and carb, measure fuel pressure with the boat going as fast as it can.

Database contains 1 Sea Ray 180 Bow Rider Outboard Manuals (available for free online viewing or downloading in PDF): Owner's manual supplement . I think that should do it but I work for tips so I do want to make sure you are happy with my service before you go. Gas and diesel marine mechanic.Degree in Marine Technology. I would also do it in this specific order, as it is the most time efficient way to go about it.1.

Was there something else, or were you going to have a look at things and get back to me?S​o all you need here is a length of automotive fuel line, the cheap stuff. It was my first boat bought last year.

One of the first recreational boat manufacturers to build using fiberglass, Sea Ray began operations in 1959.

Original owner put 150 hours. has the compression itself ever been checked?D​id you have any specific questions that you wanted me to answer, or would you prefer if I explained what we would do in the shop, going step by step, covering all bases?Sure thing.

When reved up, the timing should advance to 25+ degrees. Does that all make sense to you.

Half the time there isn't anything wrong the motor itself, but rather something wrong with the boats fuel system. I read what you wrote. More Sea Ray Manuals . timming is dead on 8 deg B"I have a 1999 Sea Ray 210 with a 5.0 Mercruiser I/O.

Stick a bolt in the end of the line so it can't leak. Pressure needs to be at least 3 psi.

with any old hose from the hardware store?Thanks again for the clarification, I'm going to take some time to review the rest of your write-up, but I will be sure you are credited for your in-depth answer!Jason and 87 other Boat Specialists are ready to help youDisclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. It becomes worse the longer it is ran. When running off of a portable gas tank, are there any special considerations, or am I okay to run it on the lake with just a normal gas tank (the kind people use to fill up lawn mowers?)

View and Download Sea Ray 180 Bow Rider Outboard owner's manual supplement online.