how to tell if seadoo wear ring is bad

The slightest of grove in the wear ring could affect the take off power of the watercraft.I have a 17 rxpx 300. At about 6-7 mph it starts to rev and then eventually catches up to itself. The previous owner had no idea last time repairs were done so I thought the replace the impeller with a solas OX. So it’s important to be careful when riding and be aware of your surroundings.Here is a picture of a damaged impeller and wear ring…My wear ring is definitely damaged, but it was caused bff the impeller shearing off. Do you think that the whole jet pump assembly should be changed out?Sounds like cavitation. Quickview. The best thing to do is to avoid sucking things up the best you can.So I have a 1995 wave venture and I recently replaced the wear ring due to what I believed was cavitation. When I’m doing 10 mph and clamp the throttle there is no problem taking off. If they’re missing that is not good and should be replaced.Hi Steven, 2006 wake edition, my wear ring is knackered and needs replacing, whilst riding it I found the usual symptoms.. but the 12v low came on the dash, I’ve charged my battery, I’ve been told by my friend dad that he read/heard something that the ecu will discharge the battery to eventually cut it out, to stop the engine over heating from high revs(7500rpm), is this correct? It’s dangerous to do that and if done wrong you can do serious damage to the machine no matter who makes it.The best thing to do is to tow it land and put it on a trailer. Jet Ski’s do not have transmissions if the engine is on the then impeller is moving.The forward and reverse are done by moving a bucking up and down to redirect the thrust.The slipping or not feeling like the engine is catching until later is because the wear ring has a groove cut into it. Sea-Doo PWC Manuals; Sea-Doo Boat Manuals; Sea-Doo Operator Manuals; PERFORMANCE PARTS. im lostSounds like you have multiple things wrong.

The Jet Planes engines have blades with very tight tolerances in order to create the thrust for taking off. Yamaha Jet Pump Housing Insert Wave Raider /Wave Venture /GP /Xl 1995-2004. The main purpose of the wear ring is to protect the impeller as it provides the necessary waterjet propulsion for the Sea-Doo. A wear ring is a good thing.Is a wear ring perfect? The previous owner … The heat generated by the hat’s surface spinning against the face of the carbon ring can lead to premature wear (and failure) when operated too long out of the water. I continued to ride for about 8-10 min probably going a max of 30mph if I had to guess. Something is not right with the impeller or wear ring from what you’re saying.What if you just bought a seadooo and looked in the back and notice that the wear rings is completely gone all but 1 small peice left on the edge and the blades look chewed up and it sounds horrible from the back…is it still fixable with out having to buy the pumpIt should be still fixable but the best option is to let a jet ski mechanic take a look at it.

I then replaced it and put everything back together, now when I give it fulll throttle it basically doesn’t take off fast and then once it hits 20mph or so it goes like it should. If it’s big enough it can stop the impeller and thus shut the engine off.The good news is that the Engineers at Seadoo have figured out the solution. Limped to a boat ramp 500 metres away and took it straight to the dealer. Makes me nervous. MY QUESTION to you- is there any reason the RPMs would eventually be affected by the wear ring? 2-Stroke SeaDoo Sport Boat Forum . Hydro-Turf; Sea-Doo Spark Parts; Sea-Doo 300 Parts; Sea-Doo RXPX 260 Parts; Sea-Doo RXTX 260 Parts; Sea-Doo … Why does an impeller shear off?

This makes the craft feel like it wants to take off and is giving you all the power in the world but you’re just not moving that much.The reason for the Grove is due to sucking something up. That way, you know it's right. I have a question for ya.